Followers

Monday 20 March 2017

JUST FOR YOU





Good morning




I don't think I've ever made such a 'busy' card as this before but there is a first time for everything!
This is an 8" square white card base with a thin mat of pearlised teal card by Crafter's Companion then another mat of white foundation card by Creative Expressions.
I used the Scattered Leaves Background Die by SW for Creative Expressions, I removed the inner cutting die then die cut the background die onto pearlised teal card.  I attached mounting foam to the back and adhered it to the left of the card.
I die cut numerous layers of the four flower Chrysanthemum Die Set by SW for CE in teal and white card and created three flowers.  These were adhered to the right of the card.  From the same die set I die cut several leaves in white card then covered these with Diamond Sprinkles Glitter Jewels by CE and arranged them around the flowers.  I die cut and embossed one of the Wispy Fronds by SW for CE in white card and adhered that below the middle flower so that it would drape downwards.
The sentiment from CE's Amazing Sentiments was stamped and embossed onto teal card with Perfect Medium Clear Ink Pad and WOW Black Twinkles Embossing Powder.  I used two oval dies from my stash to die cut the sentiment and adhered this onto white card.  I also applied a thin layer of Cosmic Shimmer Dries Clear PVA Glue to the edge of the teal card and covered this with Diamond Sprinkles

Using Random.org to pick a  name as the winner of Saturday's card, it has chosen:

Pam
please email me with your postal details for me to send you the card.











































Thank you for visiting my blog, I read all your comments and appreciate you taking the time to leave me a message and hope my designs have given a little inspiration


June x



Sunday 19 March 2017

INSPIRE

Hi, thanks for popping by...


Today's card is one that I made a while ago.  I have only a few favourite colour combos; white on white, black and white, aqua and white, pink and white, yellow and black and finally, blue and white!
We're in the middle of relocating my craft room to another part of the building and by the end this week we hope to be 95% finished, hence showing one of my older designs today!
This is a large card, just over 8"x9".  I cut a smaller layer to sit onto the base card and using a Black Micron Pen I made small dots around both layers.
I cut and embossed the flowers in blue card and white pearlised card by Crafter's Companion.  My apologises as I am unable to remember the name of the flower die but I'm quite sure it is by Spellbinders.  The flowers were adhered onto white card then I die cut and embossed two frames using Sue Wilson's Pierced Rectangles and adhered these to the card.
I stamped the sentiment, by Creative Expressions, onto white card and used a punch to cut it out.  I added mounting foam to the back and adhered to the centre of the card.
To complete I added 3 white flat back pearls to the centre of each flower

There is still time to comment on yesterday's card, should you like the chance to give it a new home, as the winner is not picked until Monday morning


Thank you for visiting, I read all your comments and appreciate you taking the time to leave me a message and hope my designs have given a little inspiration.

June x

Saturday 18 March 2017

JUST FOR YOU ~ SATURDAY SPECIAL GIVE-AWAY CARD

Hi, thanks for popping by...

I have a CAS (clean and simple) design for today's give-away.
I've used Peach and Black Foundation Card by CE, the Background Die from SW's Belgian Collection for CE (I used only the large die and the inner cutting die) as well as the Mia Die by SW for CE, the Mia Die Set is a 3 part set, I chose not to use the inner circle die for this design and stamped the sentiment onto the centre using Ranger's Black Soot Ink Pad.

If you would like to give this card a new home all you need to do is leave me a comment and I will use Random.org Name Picker to choose a name on Monday morning

Have a great weekend

June x

Thank you for visiting, I read all your comments and appreciate you taking the time to leave me a message and hope my designs have given a little inspiration.

Friday 17 March 2017

HAPPY ST PATRICK'S DAY TO ALL IRISH FRIENDS AND FAMILY

Hi, thanks for popping by...

I have this fun card for you today
a working candy machine that is also refillable!



It is suitable for all ages and not just for St Patrick's Day as it can be designed to suit your personal requirements.  Ideal for birthdays, 'special' birthdays that have a 0 or 5 in the number', Christmas, the list is endless and with Easter soon approaching it is ideal as it can be filled with mini eggs

If you would like to pre-order please email me with your requirements to:


These are £10 plus p&p and will be filled with your choice of candy

Thank you for visiting today, I read all your comments and appreciate you taking the time to leave me a message and hope my designs have given a little inspiration.

June x

Thursday 16 March 2017

BE THE CHANGE

Hi, thanks for popping by...

I have to start by saying how I wish you could see this card in the 'flesh'!! We have had such a time trying to get the colouring right and this is the best of them all, lol!  Adjusting the contrast, and just about everything else, resulted in the image being either too dark or too light.  I plumped for the lighter one, which is the top card, then went back to the other images, did a few more clicks resulting in the second card.  What is your opinion?  It really is a pretty delicate shade... may be I should have kept this for the Saturday Give-Away Card and at least the recipient would see the true colours lol.

This is an 8" square card.  I stamped the sentiment, Change by Clarity,  using Worn Lipstick Distress Ink.  On another piece of white card I stamped the Rose Stamp by Clarity several times with Perfect Medium Clear Ink Pad.  I sprinkled WOW Opaque Embossing Powder over the image and heat set it.  I used Mowed Lawn Distress Ink to add colour to the edge of the card, then Worn Lipstick Distress Ink, and finally Squeezed Lemonade Distress Ink to the centre.  I used a paper towel to buff the image. 

 On a separate piece of white card I stamped the Carnation by Clarity, sprinkled WOW Opaque Embossing Powder over the image and heat set it.  I placed a Spellbinders Die over this then using  the same inks as on the larger card coloured the image then die cutting and embossing it.  Mounting Foam was added to the back of this topper.  I glittered one small butterfly and then added two white flat back pearls to it, the other butterfly I coloured with Squeezed Lemonade, not forgetting to colour the underside too and added one flat back pearl. 

To complete the card I adhered a lace trim to one side of the larger image (I had this die cut in my stash) then adhered the smaller topper.  I added three 8mm white flat back pearls to the top right of the card.

As it is St Patrick's Day tomorrow I have a fun card to share with you

Thank you for visiting, I read all your comments and appreciate you taking the time to leave me a message and hope my designs have given a little inspiration.

June x

Wednesday 15 March 2017

Hi, thanks for popping by...

Sometime in our life, unfortunately, we may need to send a sympathy card.  A friend of ours has had a bereavement and this is the card  I made to send to her.
I stamped directly onto a white 6" square card using an Adirondak Ink Pad in Slate.  The image is as shown on the card, it is a good size stamp, to-date I do not have who makes the stamp, so if you know please let me know!
I used a light and a medium green pencil to colour the leaves then cut two thin strips of card, one in black, the other in a pale green and adhered these to the side of the card.
A personal message was inserted to complete the card.

I made extra of the same card and now have these stored, although I do hope I never have to send another.  You may be asked to make a sympathy card and having a few in stock does help

I am so happy you have visited today and hope you have been inspired.  Your comments are always welcome and I do read them all

June x

Tuesday 14 March 2017

TUESDAY TUTORIAL

Hi, thanks for popping by...

I love the Jewelled Heart Die Set so much that I decided to show you another way it can be used, compared to yesterday's card, where I created a shadow effect with it.
Below are the 'ingredients'  for today's card/tutorial




  • Fillables - Jewelled Heart Die Set by SW for CE
  • Heart Shaped Treat Cups by CE
  • Stamp Set by John Lockwood for CE
  • Cascading Hearts Embossing Folder by SW for CE
  • Cosmic Shimmer Dries Clear PVA Glue by CE
  • Adirondak 'Pitch Black' Ink Pad by Ranger
  • MISTI Stamping Tool ~ my preference but not obligatory
  • Crafter's Companion Pearlised card 
  • Silver Mirri Card (my own stash)
  • Flowers (my own stash)
  • Spellbinders' Platinum Machine

I cut the pearlised card to 6.75"x5.5" and placed this inside my MISTI.  The area to be stamped was dusted with an anti-static bag prior to placing the stamp in position.  I inked the stamp with the pitch black ink pad and stamped the card.  I only stamped this once as I did not want a heavy black sentiment when the rest of the card was white and silver.

The inner cutting die was put into position and die cut.  Once cut I then place the card in the embossing folder and ran it through my Platinum.  This is my personal choice for die cutting and embossing.  I still have my 2 Grand Caliburs and my trusty Cuttlebug.  The Cuttlebug is ideal to sit on your work table when card making, providing you are using smaller dies, and my Grand Calibur machines are used when I have card classes.

I applied Cosmic Shimmer Glue to the back of the heart cut out and near to the edge prior to placing the treat cup into the aperture.  You will see above how, when I applied pressure to the treat cup edge, the glue as spread a little.  That is not a problem, you need to have the treat cup securely adhered to the card.  To ensure the contents would not 'escape' I then added ordinary tape to the edges.
I added the cut out hearts, from the die set, and some silver sequins into the treat cup then adhered a piece of silver mirri over the opening to ensure the contents remained in the cup!

I am unable to show you just how beautiful the Jewelled Heart actually is once it is die cut because using mirri card did not produce a clear image when photographed on its own.  It is a beautiful die set and if you scroll to yesterday's post you will see I have used it there but on white card and pink card.  Prior to adhering the mirri jewelled heart, over the treat cup, I added Cosmic Shimmer Glue around the base of the cup.  I then applied the glue to the back of the die cut but, not, to the edge of the mirri because I am unable to do this without spreading the glue over the outer part of the treat cup!  So if you add the glue to the cut edge, as above, you should not mark the cup

To complete the card I added one heart to the top right of the card and a few flowers to the bottom left of the card.  These were from my stash

Thank you for visiting, I do read all your comments and appreciate you taking the time to leave me a message. I also hope my designs give a little inspiration

June x
 
 
 
 
Code line 7 9 is for loading jQuery library. Remove this line if you’ve already loaded it somewhere else in your blog. Hint: If your blog has an image slider, carousel or something with fading effect running, chances are it is powered by jQuery. If this widget doesn’t work, the first thing you want to do is comment out or remove this line. To use your own button, replace the URL in line 3 with the direct link URL to the image. Make sure to keep the quotes. To reposition the button, replace center in line 4 with the new position as listed below: